Operation
WELL™ Quad-M User Manual
-13-
4. Operation
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu options or increases the
numeric value when in a function
<DOWN>
Navigates downward through the menu options or decreases the
numeric value when in a function
Control Options
You can set the WELL™ Quad-M starting address in the 001 to 512 DMX range. This
enables control of up to 34 products in the 15-channel
TR16
personality.
Programming
The menu map shows the main level and a variable number of programming levels for
each option. For more information on how to use the menu options, refer to the
Menu
Map
section.
•
To go to the desired main level, press
<MENU>
repeatedly until the desired option
displays on the control panel. Press
<ENTER>
to select. This will take you to the first
programming level for that option.
•
To select an option or value within the current programming level, press
UP
or
<DOWN>
until the option shows on the display. Press
<ENTER>
to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
•
Press
<MENU>
repeatedly to exit to the previous main level.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the
PERS
main level.
2. Select the desired personality (
TOUR, TR16, ARC.1, AR1.D, ARC.2, AR2.D, AR2.S
or
HSV
).
For the highest starting address you can select for each personality, see the
DMX
Values
section. Verify that the starting addresses on the products do not overlap
due to the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the running mode:
a. Go to the
RUN
main level.
b. Select the
DMX
programming level.
3. Set the starting address:
a. Go to
ADDR
main level.
b. Select the starting address (
D.001~512
).
The highest recommended starting address for each DMX mode are as follows:
DMX Mode
DMX Address
DMX Mode
DMX Address
DMX Mode
DMX Address
TOUR
503
ARC.2
509
HSV
510
ARC.1
510
AR2.D
508
TR16
498
AR1.D
509
AR2.S
507
