Operation
-14-
WELL™ Quad-M User Manual
Loss of Signal Setting
This setting controls how the product will respond when the DMX signal is lost.
1. Go to the
SET
main level, and select
DERR
.
a. Select
SAVE
to make the product use the last command used when the signal
is lost.
b. Select
BLAK
to turn off the all the LEDs when the signal is lost.
Static Color
The Static Color mode allows for permanent RGBA color mixing without a DMX
controller.
1. Go to the
STAT
main level.
2. Select the desired color (
RED
,
GREN
,
BLUE
, or
AMBR
).
3. Select the desired color value (
000
~
255
).
4. Repeat the steps for additional colors.
5. Select
STRB
.
6. Select the desired frequency (
00
~
20
).
Auto Programs
Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1. Go to
AUTO
.
2. Select the desired auto (
AT. 01~10
)
or custom program (
PR. 01~10
).
3. Select the desired speed at which the chosen program will run (
P. 000~255
).
You cannot edit any of the auto programs (AUTO 01~10).
Edit Custom
Programs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the
EDIT
main level.
2. Select the desired auto program (
PR. 01~10
).
3. Select the desired scene (
SC. 01~30
).
4. Select the desired color or effect (
RED
,
GREN
,
BLUE
,
AMBR
,
STRB
,
TIME
, or
FADE
).
5. Select the color or effect value (
000~255
for colors and timers, or
00~20
for strobe).
6. Repeat the steps for additional colors or effects.
7. Return to the scene level (
SC. 01~30
).
8. Repeat the settings of colors and effects for the other scenes.
Strobe Personality
This setting allows you to select the CLASSIC (01~20 Hz) strobe or SPECIAL
(Random/Slow/Fast) strobe personalities.
1. Go to the
SET
main level.
2. Select a strobe personality (
SPEC
or
CLAS
).
Battery Life
This setting allows the user to select the output intensity for a given runtime (battery life).
1. Go to
SET
.
2. Select
LIFE
.
3. Select a battery life (
ECON
or
LONG
).
