Operation
12
Xeno™ 2500 User Manual Rev. 1
Master/Slave Mode
This mode allows you to set the MASTER product to control other products daisy
chained together. There are 3 ways to configure Master/Slave mode.
Standalone Flash
Master/Slave Mode
1. Go to
FL. (00~99)
in the main level on the first MASTER product.
2. Select the desired Flash Speed (
00~99
).
3. Go to
A.
(
001~512
) in the main level and set the DMX address to
A.001
.
4. Connect the SLAVE products using the SLAVE OUT connection on the back of the
MASTER product.
5. Connect the rest of the SLAVE products using the DMX IN/OUT connections.
6. Go to
A.
(
001~512
) in the main level of each of the SLAVE products and set the DMX
address to
A.002, A.003, A.004 …
as it pertains to each product in the chain.
Sound-Active Flash
Master/Slave Mode
1. Go to
Aud.
(
0~9
) in the main level on the first MASTER product.
2. Select the desired sound-active mode (
0~9
).
3. Go to
A.
(
001~512
) in the main level and set the DMX address to
A.001
.
4. Connect the SLAVE products using the SLAVE OUT connection on the back of the
MASTER product.
5. Connect the rest of the SLAVE products using the DMX IN/OUT connections.
6. Go to
A.
(
001~512
) in the main level of each of the SLAVE products and set the DMX
address to
A.002, A.003, A.004…
as it pertains to each product in the chain.
DMX Control
Master/Slave Mode
1. Go to
A.
(
001~512
) in the main level of the first MASTER product and set the desired
DMX starting address.
2. Connect the SLAVE products using the SLAVE OUT connection on the back of the
MASTER product.
3. Connect the rest of the SLAVE products using the DMX IN/OUT connections.
4. Go to
A.
(
001~512
) in the main level of each of the SLAVE products and set the DMX
address to
A.002, A.003, A.004…
as it pertains to each product in the chain.
If more than 4 products are daisy chained together, the first product is the Master,
and the Slave products are set in order as 2, 3, 4, 1, 2, 3, 4 … The last 4 products
run the same patterns of the first 4 products, and so on.
Menu Map
Main Level
Programming Levels
Description
A.
001~512
Selects a starting DMX address
d.
3CH
Selects DMX channel mode
4CH
FL.
00~99
Selects Standalone mode and the strobe speed
Aud.
0~9
Selects Sound-Active mode
