Thermal Imaging Camera C.A 1879
English
Page 13 sur 22
6.4.
Audio settings
♦
Imager sounds :
Select “Off” to mute all audible outputs.
♦
Voice annotation :
Select “Session” to add a voice message at the start of a set of images (A session ends when the imager is
switched off).
Select “Individual” to add a voice message to each saved image.
Select “Combined” to add a common voice message at the start of a set of images and add additional
comments for each image.
♦
Voice playback :
Select “speaker” or “headset” for the desired method of audible outputs.
♦
Volume :
Select the volume of the audible outputs from 1 to 9.
If session is selected the voice message is recorded in the audio settings by pressing Hotkey 3. Recording is
stopped by pressing Hotkey 3 again. Hotkey 2 can be used to play back the recorded message. Hotkey 3
can be used to re-record if necessary.
6.5.
Image browser
The saved images are shown on the screen with the most recently saved image first.
Select the desired image by means of the navigation keys.
To display the selected image press Hotkey 3.
To delete the selected image press Hotkey 2, to confirm deletion press Hotkey 3.
When a stored image is displayed, press Hotkey 3 to return to live imaging.