15
English
Thank you for purchasing a CA 5220G multimeter.
To obtain the best service from your unit :
■
read these operating instructions carefully,
■
comply with the precautions for use.
WARNING, risk of DANGER! Refer to the user's manual.
Failure to perform the instructions in this operating manual
preceded by this symbol, or to perform them correctly,may
cause bodily injury or damage to the instrument and the
installations.
Equipment protected throughout by double or reinforced
insulation.
The rubbish bin with a line through it means that in the
European Union, the product must undergo selective disposal
for the recycling of electric and electronic material, in
compliance with Directive WEEE 2002/96/EC.
Application or withdrawal authorized on conductors
containing dangerous voltages. Type A current sensor as
per IEC 61010-2-032.
Definition of measurement categories :
- Measurement category III corresponds to measurements on
building installations.
- Measurement category II corresponds to measurements taken
on circuits directly connected to low-oltage installations.
- Measurement category I corresponds to measurements taken on
circuits directly connected to the network.
Replacement of the fuse :
For safety reasons this fuse must always be replaced by
an identical model :
■
Fuse 0.4A HBC - 600V mini (6.3 x 32mm)
■
Fuse 12A HBC - 600V mini (10.3 x 38mm)
