7
7
1.4. The terminals
These are the multimeter terminals:
1
2 3
Figure 4: the terminals
N°. Input
1
6 A, 10 A current
2
Common
3
Other measurements
2. USE
2.1 First use
Fit the battery shipped with the instrument as follows:
1. Using a screw driver, unscrew the four screws on the cover (item 1) located at the rear of the unit;
2. Place the battery in its housing (item 2) while respecting the polarity;
3. Screw the cover back on.
Figure 5: access to the battery
2.2 Starting up the multimeter
The switch is in the OFF position. Turn the switch to the function of your choice. All the display segments appear for a few
seconds, then the screen for the selected function is displayed. The multimeter is now ready for measurements.
2.3 Turning off the multimeter
The multimeter can be turned off either manually by returning the switch to the OFF position, or automatically after ten
minutes without use. After nine minutes an intermittent sound alarm is triggered until the instrument is shut down. Once the
instrument is shut down, to reactivate it press the
key or turn the switch by at least one position. The latter method
cancels the active functions.
1
2
