54
4.3. PRESENCE OF DANGEROUS VOLTAGE
The voltage is regarded as dangerous from 25, 50, or 65V, depending on the value of UL programmed in SET-UP.
For measurements made without voltage (continuity, insulation, and 3P earth), if the device detects a voltage, it
One or more terminals are not connected.
4.2. OUT OF MEASUREMENT RANGE
The value is outside the measurement range of the device. The minimum and maximum
values depend on the function.
> 4 0 . 0
W
< 5 . 0 V
}
If the device detects an error in the measurement configuration or in the connection, it displays this symbol and a
corresponding error message.
4.5. DEVICE TOO HOT
The internal temperature of the device is too high. Wait for
the device to cool off before making another measurement.
This case concerns essentially the test of residual current
devices.
disables starting of the measurement by the pressing of the
TEST
button and displays an explanatory error message.
For measurements that are made on live circuits, the device detects the absence of voltage, the absence of a protective conduc-
tor, a frequency or voltage outside the measurement range. When the
TEST
button is pressed, the device then disables starting
of the measurement by the pressing of the
TEST
button and displays an explanatory error message
4.4. INVALID MEASUREMENT
4.1. NO CONNECTION
