79
IEC 61010
IEC 61557
MADE IN FRANCE
8.4. METROLOGICAL CHECK
Like all measuring or testing devices, the instrument must be checked regularly.
This instrument should be checked at least once a year. For checks and calibrations, contact one of our accredited metrology
laboratories (information and contact details available on request), at our Chauvin Arnoux subsidiary or the branch in your country.
8.5. REPAIR
For all repairs before or after expiry of warranty, please return the device to your distributor.
Set the switch to Z
S
(R
A
/S
EL.
).
SET UP
OFF
Press the 3 keys indicated below simultaneously.
SET UP
OFF
OK
6. Place the battery in its compartment and arrange the wires to that they do not protrude.
7. Put the battery compartment cover back in place and screw the two quarter-turn screws back.
8. Charge the new battery
fully
before using the device.
9. If the battery remained disconnected for more than 5 minutes, you may have to reprogram the date and time of the device
Whenever the battery is disconnected,
even if it is not replaced
, it must be charged fully. This is so that the device will
know the charge condition of the battery (this information is lost when it is disconnected).
8.3. RESETTING THE DEVICE
If the device crashes, it can be reset, like a PC.
