28
➃
Trigger
Press to open the jaws
3-2 FUNCTIONS
➄
HOLD button
In a difficult or badly lit environment, this button holds the display on the last
value for subsequent reading.
This function applies to all the positions of the switch.
NB
: Turning the switch inhibits the HOLD function.
➅
Rotary switch: main functions
■
Switch on by selection of the main function: A amp, V volt,
Ω
ohm,
continuity sound test, ADP adapter.
NB
: the diode test function is accessible via the secondary functions.
■
Manual OFF
NB
: When switched on, the clamp is in automatic mode: display without
RANGE, without HOLD, on AC mode, without MIN/MAX, without diode
test
.
➆
Secondary function buttons
When the main function is selected, these buttons qualify the signal that is
present.
■
MIN/MAX: measurement of the MIN value or the MAX value. Accessible
for all the main functions and frequency (Hz).
■
AC / DC :
- for the A and V functions, allows switching from AC mode selected
when switched on, to DC mode.
- for the function selected when switched on, allows switching to the
diode test function.
