background image

                                                                                                                                          Overview 

 

 

 

ALPAHAAIR 450 USER MANUAL

 

| 2021-03

 

 

P a g e  |  3

 

1 Overview 

This manual contains important information related to the system and software. Please read 
it carefully before its use.

 

 

1.1 

Copyright

 

Copyright 2019-2021

 

CHC | Shanghai Huace Navigation Technology Ltd. All rights reserved. The CHC are trademark 

of Shanghai Huace Navigation Technology Limited. All other trademarks are the property of 

their respective owners.

 

 

Trademarks

 

Windows, Windows 10, Windows XP and Windows 7 are registered trademarks of Microsoft 

Corporation.

 

All  other  product  and  brand  names  mentioned  in  this  publication  are  trademarks  of  their 

respective holders.

 

 

1.2 

Symbol Explanation

 

Type 

Description 

  FORBID 

Indicates a potentially hazardous situation or an unintended use 
which, if not avoided, could result in death or serious injury. 

  WARNING 

Indicates a potentially hazardous situation or an unintended use 
which, if not avoided, may result in minor or moderate injury. 

  NOTICE 

Indicates a potentially hazardous situation or an unintended use 
which, if not avoided, may result in appreciable material, financial 
and environmental damage. 

  INSTRUCTION 

Important  paragraphs  which  must  be  adhered  to  in  practice  as 
they enable the product to be used in a technically correct and 
efficient manner. 

 

Warning messages are an essential part of the safety concept of the instrument. They appear 
wherever  hazards  or  hazardous  situations  can  occur.  For  the  users‘  safety,  all  safety 
instructions  and  safety  messages  shall  be  strictly  observed  and  followed!  Therefore,  the 
manual must always be available to all persons performing any tasks described here.

 

 

For your safety it is important to read and fully understand the different signal words and their 
definitions in the table below.

 

Summary of Contents for AlphaAir 450





















Reviews: