CHCNAV ALPHAUNI 900 USER MANUAL
| 2020-06
P a g e | 40
6.1.3.6
Laser state
▪
Laser icon: It indicates the laser scanner status and generally it will show green, If the
laser scanner does not work normally, it will display red color and please contact CHCNAV
Support Team.
▪
Laser state: After successfully connect to LiDAR, the "link" state will be displayed. When
the collection operation begins, the laser status will be shown as “capturing”. When the
laser fails and disconnects during collection, the laser state will show “not link”.
▪
Synch state: After successfully connect, the controller will query the laser synchronization
state. When the equipment is successfully timed, it will display "synchronized". Otherwise,
it will display "not synchronized".
▪
Free memory: It indicates the remaining capacity of the SD card. Before the collection,
please check whether the rest of SD card is enough.
▪
Scan speed: It indicates the laser rotation linear speed. After the system is powered on,
the laser scan speed will be automatically set to “200”.
▪
Laser PRR: After the system is powered on, the laser point frequency will be automatically
set to "50khz-920m".
▪
Temp: It indicates the internal temperature of equipment.
6.1.3.7
Related Buttons
After system is successfully initialize, click “Create Prj” to start work. After start, keep the
equipment as stationary for more than 5 minutes, and then click “Capturing” to start data
collection.
