Rover station setup and operation
42
constellation operation, for example, GPS and GLONASS, the receiver must
track at least six satellites.
To continue to survey at centimeter precisions, the rover must continuously
track at least four satellites that the base station is also tracking. The radio
link between the base and rover receivers must also be maintained.
Loss of the satellite signals will result in a loss of centimeter position
precision.
5.2 Rover station setup
1.
If required, connect the radio antenna onto i70+ receiver.
2.
Screw the receiver on top of the range pole.
3.
Fix the controller bracket on the range pole.
4.
Fit the controller in the controller bracket.
5.
Level and plumb the receiver over the target measuring point.
