Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
P6
P6
P6
P6----M
M
M
M Owner‘s
Owner‘s
Owner‘s
Owner‘s Manual
Manual
Manual
Manual
8
88
8----427 / v. 1.00
427 / v. 1.00
427 / v. 1.00
427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
10
10
10
10
Fig. 8
Fig. 8
Fig. 8
Fig. 8 –
––
– VCF modulation by Velocity
VCF modulation by Velocity
VCF modulation by Velocity
VCF modulation by Velocity
4.2.5
4.2.5
4.2.5
4.2.5 VCF VELOCITY AMOUNT (CC #20)
VCF VELOCITY AMOUNT (CC #20)
VCF VELOCITY AMOUNT (CC #20)
VCF VELOCITY AMOUNT (CC #20)
This parameter is active only for MIDI Notes. It doesn't work with instrument's keyboard!
The parameter sets the modulation amount of the VCF cutoff frequency by MIDI Notes velocity. It can be
temporarily changed by MIDI CC Nr. 20 - see chapter 5.1.2.2.
The parameter value is 0 to 127. For 0 value, VCF isn’t affected by the velocity data, value equal to 127 provides
maximal modulation level (see fig. 8).
4.2.6
4.2.6
4.2.6
4.2.6 VCF CHNL AFTERTOUCH AMOUNT (CC #21)
VCF CHNL AFTERTOUCH AMOUNT (CC #21)
VCF CHNL AFTERTOUCH AMOUNT (CC #21)
VCF CHNL AFTERTOUCH AMOUNT (CC #21)
Fig. 9
Fig. 9
Fig. 9
Fig. 9 –
––
– VCF modulation by Channel Aftertouch
VCF modulation by Channel Aftertouch
VCF modulation by Channel Aftertouch
VCF modulation by Channel Aftertouch
This parameter is active only for Channel Aftertouch
MIDI command. It doesn't work with instrument's
keyboard!
The parameter sets the modulation amount of the VCF
cutoff frequency by MIDI MIDI Channel Aftertouch. It
can be temporarily changed by MIDI CC Nr. 21 - see
chapter 5.1.2.2.
The parameter value is 0 to 127. For 64 value, VCF isn’t
affected by the Channel Aftertouch. For parameter
values from 65 to 127, the VCF cutoff frequency is modulated directly proportionally to value of MIDI Channel
Aftertouch. For parameter values from 63 to 0, the VCF cutoff frequency is modulated inversely proportionally
to value of MIDI Channel Aftertouch (see fig. 9).
4.2.7
4.2.7
4.2.7
4.2.7 VCF LFO WAVEFORM (CC #22)
VCF LFO WAVEFORM (CC #22)
VCF LFO WAVEFORM (CC #22)
VCF LFO WAVEFORM (CC #22)
The parameter selects waveform of the additional software LFO generator for the instrument VCF modulation.
It can be temporarily changed by MIDI CC Nr. 22 - see chapter 5.1.2.2.
The parameter value is 0 to 63. Table 3 shows waveforms corresponding to the parameter values.
Table 3
Table 3
Table 3
Table 3 –
––
– Additional LFO waveforms
Additional LFO waveforms
Additional LFO waveforms
Additional LFO waveforms
Param.
Param.
Param.
Param.
value
value
value
value
LFO waveform
LFO waveform
LFO waveform
LFO waveform
Param.
Param.
Param.
Param.
value
value
value
value
LFO waveform
LFO waveform
LFO waveform
LFO waveform
0
Saw- Fall
5
Triangle 62,5%
1
Triangle 12,5%
6
Triangle 75%
2
Triangle 25%
7
Triangle 87,5%
3
Triangle 37,5%
8
Saw - Rise
4
Triangle 50%
9
Square 12,5%
Summary of Contents for 8-427
Page 32: ......
