Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
Korg Polysix MIDI Interface
P6
P6
P6
P6----M
M
M
M Owner‘s
Owner‘s
Owner‘s
Owner‘s Manual
Manual
Manual
Manual
8
88
8----427 / v. 1.00
427 / v. 1.00
427 / v. 1.00
427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
8
88
8
memory - up to 64 interface patch parameters settings
7
77
7
can be stored (see description of CC #119 in chapter
5.1.2.3). These settings are recalled from the memory by Program Change MIDI command (see chapter 5.1.5).
Fig. 6
Fig. 6
Fig. 6
Fig. 6 –
––
– Function of the interface patch parameters
Function of the interface patch parameters
Function of the interface patch parameters
Function of the interface patch parameters
4.2.1
4.2.1
4.2.1
4.2.1 MIDI NOTES SHIFT (CC #16)
MIDI NOTES SHIFT (CC #16)
MIDI NOTES SHIFT (CC #16)
MIDI NOTES SHIFT (CC #16)
This parameter is active only for MIDI Notes. It doesn't work with instrument's keyboard!
The parameter adjusts assignment of received MIDI Note numbers to the instrument keys. The parameter value
specifies exactly the number of MIDI Note which is assigned to the lowest key of the instrument’s keyboard. It
can be changed by MIDI CC Nr. 16 - see chapter 5.1.2.3.
The parameter value can be from 0 to 67. If value 0 is set, the lowest key on the keyboard corresponds to MIDI
Note Nr. 0 and the highest key corresponds to MIDI Note Nr. 60. If value 1 of the parameter is set, the lowest
key on the keyboard corresponds to MIDI Note Nr. 1 and the highest key corresponds to MIDI Note Nr. 61. Etc.
up to value 67 of the parameter when the lowest key of the keyboard corresponds to MIDI Note Nr. 67 and the
highest key corresponds to MIDI Note Nr. 127. See fig. 7 on next page for more details.
4.2.2
4.2.2
4.2.2
4.2.2 PITCH BEND RANGE (CC #17)
PITCH BEND RANGE (CC #17)
PITCH BEND RANGE (CC #17)
PITCH BEND RANGE (CC #17)
This parameter is active only for MIDI Notes
and Pitch Bend MIDI command. It doesn't work with instrument's
keyboard and BENDER wheel controller!
The parameter adjusts maximal allowed VCOs pitch bending
8
88
8
for full range of MIDI Pitch Bend. It can be
changed by MIDI CC Nr. 17 - see chapter 5.1.2.2.
The parameter value is from 0 to 24. The 0 value switches the pitch bend off – the Pitch Bend MIDI command is
ignored. The values of 1 to 24 are equal to bending the pitch in semitones. Bending up to ±2 octave is available
thus.
7
The individual patches stored in interface memory can be named - see chapter 5.3.2.
8
Since the interface does not have direct access to the control voltage of the tone generators, the tone is not detuned continuously but in semitone
steps. Together with the tuning changes, the envelope generators are re-trigged.
Summary of Contents for 8-427
Page 32: ......