Setting Port Priority
Check Point Maestro R80.20SP Administration Guide | 116
Setting Port Priority
Description
For each Security Group port, you can set a port priority (high or standard).
Use the
set chassis high-availability port ... priority ...
command in Gaia
gClish.
Syntax
> set chassis high-availability port <
if_name
> priority <
priority
>
Parameters
Parameter
Description
<
if_name
>
Interface name
<
priority
>
Port grade
Valid values:
n
1
- Standard
priority
n
2
- Other
priority
Use the
set chassis high-availability port ... priority ...
command together with
the
set chassis high-availability factors port ...
command:
n
Set the port grade as standard or high.
For example, to set the standard grade at 50, run:
> set chassis high-availability factors port standard 50
n
Set the port to high grade or standard grade.
For example, to assign the standard port grade to
eth1-01
, run:
> set chassis high-availability port eth1-01 priority 1
