TE250XN
Rack Mounting for Check Point Appliances | 23
Item
Description
1
Rack rail screws attached to the outer rack rail
2
Rack post mounting hole for rack mount screw
Legend
Removing the Appliance
Unlock the telescopic rails to remove the appliance from the rack.
Important - To prevent injury or damage, at least two people are required to remove the
appliance from the rack.
To remove the appliance from the rack:
1. Remove the rack mounting screws in the ear mounts to enable the telescopic rails.
2. Move the appliance away from the rack as far as possible.
3. On the inner rack rail, press and pull on the white release levers on both sides of the appliance.
4. While holding the appliance, move the appliance away from the rack rail.
Appliance Air Vents
Make sure that the appliance air vents have sufficient airflow from front to rear when the appliance is
mounted in a rack.
Important - If the appliance vents are blocked, the appliance can become too hot and it
can be damaged.
The appliance and rack rails have been tested in extreme conditions and do not block air flow to the
appliance. These appliances are specifically designed to install with these rails.
