background image

Advanced Configuration 

 

Configuring Smart-1

     Page 26 

 

4.  If Multi-Domain Security Management is deployed, follow the same procedure to download the 

SmartDomain Manager. 

You have now completed the Smart-1 configuration.

 

To start working with your Smart-1 appliance as a Security Management Server refer to the 

Security 

Management Server Administration Guide

To start working with your Smart-1 appliance as Multi-Domain Security Management, refer to the 

Multi-

Domain Server Administration Guide

 

Advanced Configuration 

Advanced configuration can be done using the 

sysconfig 

or 

mdsconfig 

menu which can be accessed 

using the command line interface only. 

 

Note

 - The 

sysconfig 

menu is only available after running the 

First 

Time Configuration Wizard 

in the WebUI. 

Command line access can be obtained by console connection or through SSH. 

 

Connecting to the Smart-1 CLI 

You can connect to the command line interface of the Smart-1 appliance using: 

 

The provided serial console cable (DTE to DTE) and terminal emulation software such as 
HyperTerminal (from Windows) or Minicom (from Unix/Linux systems).  

Connection parameters for Smart-1 appliances are: 9600bps, no parity, 1 stop bit (8N1). 

 

An SSH connection to the management interface (if sshd is configured). 

 

Migration from Existing Provider-1 
Machines 

Smart-1 introduces a simple and easy to use tool that enables migration from existing NGX R65 and higher 
Provider-1 machines into the Smart-1 appliance. 

This script exports the entire existing MDS database into one .tgz file on the source machine that can be 
imported to the Smart-1 machine. 

To migrate from an existing NGX R65 and higher Provider-1 machine into the Smart-1 
appliance: 

Before starting the migration:

 

The exported configuration is approximately the size of the MDS installation. Therefore, before starting the 
migration make sure you have enough free disk space on the source and target machines. 

On the source machine:

 

1.  Get the 

p1_upgrade_tools.tgz

 package 

(

http://supportcontent.checkpoint.com/solutions?id=sk43266

)

2.  Extract the package contents 

3.  Run the export_mds.sh tool (make sure it has executable permissions) 

# export_mds.sh <path to store exported mds configuration>

 

On the Smart-1 appliance:

 

1.  Verify that no customers are defined, and that there are no global objects and policies on the Smart-1 

machine. Administrators and/or GUI clients will be overwritten. 

2.  Transfer the exported mds file to the 

/var

 partition on the Smart-1 machine.  

3.  Run the import tool: 

Summary of Contents for Smart-1 150














































Reviews: