12
Item
Description
1
RAID card
2
DIMM sockets
3
RAID card retention screw on swivel bracket
4
RAID connector
5
Swivel bracket for RAID card
1.
Remove the top cover.
2.
Find the RAID card.
3.
Release the RAID retention crew.
4.
Open the swivel bracket to release the card.
5.
Carefully pull the RAID card out of the PCI connector.
Note: Do not remove the SAS cable from the card.
Removing DIMMs
Make sure that you prepare the Security Management Appliance before you
remove DIMMs. For more information, see Preparing the Security Management
Appliance.
To remove DIMMs from the Security Management Appliance:
1.
Put on the ESD strap and attach the other end to a grounding point.
2.
Press the two retaining clips outward.
3.
Carefully pull the DIMM up.
