2
Important
•
To protect the Security Management Appliance and the memory modules
from electrostatic discharge damage, make sure that you are properly
grounded before you touch these components. For more, see the
Health
and Safety Information
in:
Smart-1 205/210 Appliances Getting Started Guide
http://supportcontent.checkpoint.com/documentation_download?ID=32280
Smart-1 225/3050/3150 Appliances Getting Started Guide
http://supportcontent.checkpoint.com/documentation_download?ID=32309
•
We recommend that you use the grounding wrist strap that is included in
the upgrade kit. The grounding plug on the rear of the Security Management
Appliance provides a chassis grounding point.
Upgrade Kit Contents
•
Installation guide -
Smart-1 Installing and Removing Memory
•
Expansion DIMMs
•
Upgrade kit sticker
•
ESD grounding strap (anti-static)
•
Screwdriver
To prepare the Security Management Appliance:
1.
From the WebUI or the CLI, shut down the Security Management Appliance.
2.
Use the power switch to turn off power to the Security Management
Appliance.
3.
Remove the power cords from the Security Management Appliance.
4.
Put on the ESD strap and attach the other end to a grounding point.
5.
Loosen the Security Management Appliance cover screws.
6.
Remove the top cover from the Security Management Appliance.
