7
8
BEFORE FIRST USE
1.
Remove all packing and materials. Be sure that all parts are included
before discarding any packaging.
2.
Pull out the power cord from the compartment under the base, and
place base on a flat surface. (Make sure the power cord comes out
of the opening in the base so unit can sit level.)
3.
To rinse the pot of any packing debris, “brew” a pot of plain water
without tea. To do so, press the button on the lid to open, then fill
kettle with water to the MAX line.
4.
Close the lid, place the kettle back on the base unit, and plug into a
power outlet.
5.
Unit should come preset to Boil (212°F); if not, use arrow buttons to
set it to Boil, then Press Start.
6.
The LED indicator lights will turn red and the display will show the
temperature as the water heats.
7.
After the boil, the unit will automatically switch to Keep Warm and
LED indicator lights will be green. At this point, empty the kettle,
then rinse the kettle with clean water. It is now ready for use.
NOTE:
Never fill the water above the MAX line or below the MIN line
indicated on the glass jar.
The Electric is perfect for all your hot-water needs: Hot or iced
tea, instant or pour-over coffee, instant oatmeal, and more. The bonus
tea infuser lets you brew your favorite loose-leaf or bagged teas directly
in the stain-resistant, borosilicate glass kettle. The kettle lights up with
bright LEDs and lifts easily from its base for easy filling at the sink and
cord-free serving; it can also be returned to its power source from any
direction, making it work well for both righties and lefties.
HOW TO MAKE TEA WITH TEA INFUSER
1.
Place kettle base on flat surface.
2.
Remove tea infuser from kettle by opening lid, grasping the tea
infuser insert using the pinch bar, and lifting it up.
3.
Fill the kettle to at least the MIN line and not above the MAX line
(1.8 liters) with cold, fresh water and place the kettle securely onto
its base.
4.
Plug in unit. The kettle will alight white, meaning it’s in standby mode.
5.
Choose one of the presets (suggested temperatures for optimal brewing
of specific kinds of teas) or your own preferred temperature by pressing
the up and down arrows on the handle. Hold the button down to go
through just the presets. Pulse the button to scroll through temperatures
in intervals as well as presets to find the perfect temperature for you.
NOTE:
You can switch temperature units (°F and °C) by holding
down both the up and down arrow buttons for 5 seconds.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
