6
RJ16-LOCK SERIES
WHEN NOT IN USE
Unplug the dispenser. Detach the lid by opening it. Then, using your thumbs, pull the inner hinge
wide enough so that you can remove the lid. Pour out any remaining water.
NOTE:
Empty the pot at least once a day. Water left in the pot can cause unpleasant odor and
accumulation of mineral deposits.
WARNING:
To avoid serious burns, always detach the lid before pouring out the hot water.
Do not allow water to splash onto the operation panel, hinge, handle or power supply plug.
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
1.
Unplug the hot water pot and allow it to cool completely. Remove the power cord
before cleaning and be sure that the socket is kept dry.
2. Wipe the hot water pot exterior with a soft, damp cloth.
3. Do NOT use abrasive cleaners or scouring pads on the inside or outside of the hot
water pot.
4.
NOTE
: Do NOT immerse the appliance in water.
5. Clean the inner pot with 2 cups water and 1 cup vinegar. Press reboil to boil the
water/vinegar combination. Then pour out, rinse with new water.
NOTE
: It is best to
use filtered, non-tap water for cleaning.
Press and lift
to open lid.
Pull apart
black hinges.
Lift off Lid.
REMOVING THE LID
Pull apart
black hinges.
