5
MODEL: RJ45 SERIES
Operating Instructions
How to Prepare a Bag
1. Open the cutter in the back of the unit.
2. Feed the roll of plastic from the bottom.
3. Use the cutter to cut the bag.
4. Put one end of the bag on top of the sealing element, but do not put over the vacuum
chamber.
5. Close the cover and press tightly until you hear it click in place on both sides .
6. Press the seal button, red light will come on and the automatic sealing will begin.
7. Press the left and right side of the cover buttons to open the cover. Take the bag out
of the machine. The bag is now ready for the vacuum sealing process.
