3
Operation
Set the thermostat to desired temperature from 30-90°C
The orange indicator will be on and the unit will cycle on and off to
maintain the set temperature
Temperature can be monitored with the dial next to the temperature
control
Set the thermostat to “0” to turn off
Note: This product is for maintaining temperature only. It is NOT suitable
for cooking or heating food from cold
Cleaning & Maintenance
Before cleaning disconnect the Pie Cabinet from the electricity supply
Allow the appliance to cool before cleaning
DO NOT immerse the pie cabinet in water, or use jet/pressure washers
to clean it
The inner body of the appliance should be wiped down at the end of
each day's operation. Additional cleaning may be required depending
on frequency of use
Warm soapy water is recommended for cleaning. Cleaning agents may
cause damage or leave harmful residues when used for a prolonged
period on stainless steel.
Troubleshooting
Condition
Possible Cause
Solution
The unit is
plugged in but
heating and
indicator light is
not on
1. The unit is not switched on
2. The plug or lead are damaged
3. The fuse has blown
1. Check the unit is correctly
plugged in and thermostat is
set above 30°C
2. Contact your Chefmaster
distributor
3. Replace the fuse
The unit is
heating but
indicator light is
not on
The indicator light may have to
be replaced
Contact your Chefmaster
distributor