RM43596 JBOD
/ System Components Removal and Installation
│
16
2-1 Top Cover Removal and Installation
Figure 7
Top cover installation
1. Align the guide pins of this cover with the grooves on the chassis base, and install the cover vertically as shown.
(5 guide pins for both side)
NOTE:
Keep the latch vertical.
2. Press the latch to lock.
3. Secure with 4 screws as shown.
Figure 8
Top cover removal
1. Loosen 4 screws on the cover as shown.
2. Pull the latch as shown to release the cover.
3. Remove it by both hands to hold each side.