RM43596 JBOD
/ System Components Removal and Installation
│
18
Figure 11
3.5” HDD installation (tool-less type)
1. Slide in the HDD until align the anchor point of HDD tray.
2. Push down the HDD when it is secured with a click.
Figure 12
3.5” HDD removal (tool-less type)
1. Bottom up the HDD tray as shown.
2. Press your 2 thumbs on the HDD as shown.
NOTE:
Watch out the direction of HDD assembly while inserting.
NOTE:
Please operate this on a stable surface in case the HDD dropping unexpectedly.
NOTE:
To avoid injury, be careful of the sharp corners and rough edges on HDD tray.
3. Lift the other side with your other fingers and release the HDD.