www.chenbro.com
11
ES34069 Chassis User’s Manual Rev. A1
Installing 3.5” SATA-II Hard Drive
1
2
3
4
3
4
■
Remove the HDD Carrier from the chassis and place
the SATA-II HDD into it.
■
Attach the HDD screws on both sides
■
Slide in the assembled HDD into the chassis, suggest
install by the ID definition on the front panel
(No need to remove the front bezel)
■
Make sure the carrier is fully seated
■
Slide the assembled CD-ROM into the chassis
■
Make sure the holder latch is secured when fully
seated