background image

 

     

 
 

www.chenbro.com                                                         

 

 

2

ES34069 Chassis User’s Manual    Rev. A1 

 

Copyright 

Copyright © 2007 Chenbro Micom Co., Ltd.. All rights reserved. 
 
Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom 
Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any 
purpose other than internal use within purchasing company. Therefore, reproduction, 
modification in any form or by any means, electronic, mechanical or otherwise, for reasons 
other than internal use, is strictly prohibited without prior written permission. 
 
Chenbro Micom Co., Ltd. reserves the right to make improvement and modification to the 
products indicated in this manual at any time.    Specifications are therefore subject to change 
without prior notice.   
 
Information provided in this manual is intended to be accurate and reliable.  However, 
Chenbro Micom Co., Ltd., assumes no responsibility for its use, nor for any infringements upon 
the rights of third parties, which may result from its use.     
 

Technical Support 

Chenbro works hard to offer our customers maximum performance from our chassis.   
But in case you have any problem with our product you can find supports from the 
following resources. 
 

Web Support 

Detail information of our products is in our website. You can find technical updates, installation 
guides, FAQs, Technical specifications and more. Our web address is: www.chenbro.com. 
 

Email Support 

You can also fill out the technical support form at our Technical Support page. Your technical 
issue inquiries will be sent directly to our support professionals.   
 

Phone Support 

You can also contact Chenbro HQ or branch office for immediate support; contact 
Information is as following: 
 

Chenbro HQ 

 

                 

Chenbro Europe B.V.  

    

       

Chenbro Micom (USA) Inc.

 

Tel: 886-2-8226-5500  

    Tel: 31-40-295-2045   

     Tel: 1-909-947-3200 

Fax: 886-2-8226-5423         Fax: 31-40-295-2044   

 

 

Fax : 1-909-947-4300 

 

 

 

 

 

 

 

 

Summary of Contents for ES34069





















Reviews: