RB13804N4WFT
System
Components Removal and Installation
│
19
Figure 10 Front top cover installation
1.
Align the guide pins of the cover with the grooves on the chassis base, and slide the cover toward the front panel.
(two guide pins for both sides)
NOTE:
Ensure that arrows on the cover indicating the back of the chassis.
2.
Secure it with two screws as shown.
Figure 11 Rear top cover installation
1.
Align the guide pins of the rear top cover with the grooves on the chassis base, and slide the cover toward the front panel until it is
secured. (four guide pins for both sides)
Note:
Ensure two buttons lock into place.
2.
Secure it with two screws as shown.