RB14604
│
15
1-8
System Packaging
The original Chenbro packaging, where the server system is delivered, is designed to provide protection for L6 configuration and
tested to meet ISTA (International Safe Transit Association) Test Procedure 1A (2008). The packaging is also designed to be reused
for shipment after system integration has been completed.
The original packaging includes the shipping box
and various protective inner packaging components, which are designed to as a
protective packaging system. When reused, all the original packaging material
s
must be included such as boxes and each inner
packaging component. In addition, all inner packaging components MUST be reinstalled in the proper location to ensure adequate
protection of the system for subsequent shipment.
Table 5 System packing information
Part Number
Single/Bulk
Form Factor
Support Level
87H314604-302
Single
670 x 556 x 140
L6
NOTE:
The design of the inner packaging components does not prevent improper placement within the packaging assembly.
There is only one correct packaging assembly that will allow the package to meet the ISTA (International Safe Transit Association)
Test Procedure 1A (2008).
Failure to follow the specified packaging assembly instructions may result in damage to the system during shipment.
Table 6 Product weight information
Product
Unpackaged Net
Weight
（
kg
）
Packaged Gross
Weight
（
kg
）
Unpackaged Net
Weight
(lb)
Packaged Gross
Weight
(lb)
RB14604
8.2
10.3
18.10
22.70
NOTE:
An L6 system includes MB without processors, memory, drives, or add-in cards. It is the system configuration as
shipped from Chenbro. Weights of integrated system (system configurations that include the items above) will vary
depending on the final system configuration.
