RM138 Series
System
Components Removal and Installation
│
27
Figure 30
2.5’’
HDD removal (tool-less type)
1.
Bottom up the HDD tray, and face the side without a concave slot of HDD tray as shown.
2.
Press your two thumbs on the HDD as shown.
NOTE:
Please operate this on a stable surface in case the HDD dropping unexpectedly.
3.
Lift the side with a concave slot by your other fingers and release the HDD.
Figure 31
2.5”
HDD installation (tool-less type)
1.
Slide in the HDD until align the anchor point of HDD tray.
2.
Push down the HDD when it is secured into place.