RM138 Series
System
Components Removal and Installation
│
29
2-4
Internal 2.5”
HDD/SSD Removal and Installation
Figure 34 RM13804 internal 2.5'' HDD/SSD removal
1.
Lift the plastic bracket tab to release the HDD/SSD assembly as shown.
2.
Remove it from the HDD/SSD cage.
3.
Detach the plastic bracket from the HDD/SSD.
Figure 35 RM13804 internal 2.5'' HDD/SSD installation
1.
Attach the plastic bracket with a HDD/SSD by engaging four pins with the dimples on one side of HDD/SSD.
2.
Align the two dimples of the other side of HDD/SSD with the two hooks on the HDD/SSD cage as shown.
3.
Push down the side with the plastic bracket of HDD/SSD assembly until it is secured into place.