Overview
Ultra-Short provides location and environment sensing for
Brambles platform as clip-on device thru harness.
Dimension
-
Enclosure: 184mm x 16mm x 35mm
Serial Number
-
US/NA Series: 1190125xxxxx
-
EU/Spain Series: 1193425xxxxx
Operation the device
-
Single tap button^ to Power-ON
-
Hold button for 5s & release to Power-OFF
-
Hold button for 10s to clear battery counters
(Power button accessible when enclosure is open)
LED Indications
-
Green LED when Power-ON
-
Red LED when Power-OFF
-
Flashing Red LED for device failure
-
Flashing Blue LED when firmware upgrade
Battery
-
AA Batteries: 2 cells
-
Type: Energizer L91 AA
-
Estimated pings*: 1600 – 2100 on Cat-M
network
-
Estimated pings*: 1000 - 1200 on 2G Network
Tracking
-
GNSS: fully capable GNSS tracking module
-
Network triangulation based on Cell ID
-
Triangulation based on CAT-M/NB-IoT cell info
-
Triangulation based 2G when CAT-M not
available
-
Wi-Fi MACIDs capture for location triangulation
-
BLE beacon sniffing
Physical Aspects
-
Weight: 150g
-
Enclosure Material: ABS + PC
-
Ruggedization: IP67 per IEC standard 60529
Certifications
-
FCC, CE, IC-ID, CE-UK
Sensors
-
Temperature (Resolution: 0.1°C, Accuracy:
±1.5°C, Range: -40 to +125°C)
-
Accelerometer 3-axis, ±16G
-
Magnetometer 3-axis, ±50 Gauss
Communication
-
CAT-M/NB-IoT with 2G fallback
-
Wi-Fi and BLE
-
RFID with EPC C1G2 (ISO 18000-6c) standard
Configuration Update
-
Key parameters can be configured through BRIX
-
Publish Interval: 60 minutes to 24 hours
-
Log Interval: 60 minutes to 24 hours
Data transmission and storage
-
Streams sensor data to BRIX cloud real-time^
-
Offline logging of sensor data on built-in memory
for up to 6 months when no network connectivity
Operating Temperature
- -40°C to +60°C
Built-in Antenna
-
Cellular: SMD antenna with -2dBm gain
-
BLE and Wi-Fi: PCB antenna with -2.95dBi gain
Capabilities and Durability
-
Device aware of its state when in
-
CHEP SC | Non-CHEP Dwell | Transit
-
Periodic capture of sensor data based on log
frequency
-
Secure log file transmission over Wi-Fi and
Cellular
-
Efficient power management with smart logic for
location determination
-
Over the air firmware upgrade: Wi-Fi
-
Publish based on event triggers
-
Accelerometer: Impact and movement trigger
-
Temperature: out of bound condition
Security
-
Encrypted communication between device &
cloud
-
Encrypted bootloader and application firmware
-
X.509 Public/Private key for device authentication
-
SSL/TSL v1.1 based security over network
* Battery life can vary depending on Network availability, Signal Strength, Ping Type, Log Frequency,
extreme temp and battery brand used.