6
OPERATION
Δ CAUTION
Make certain the switch is in the “OFF” position before
connecting the tool to the power source to avoid unintentional starting.
Δ WARNING
Make sure to wear eye and ear protection when operating
this equipment.
USE A STANDARD 100v OUTLET.
Plug in the vacuum and then turn on the vacuum. Plug in the machine,
hold machine with two hands and turn the power switch to the “ON” posi-
tion. The switch on the sander may be locked in the on position for ex-
tended use. To keep the sander running continuously, depress the trigger
and push in the switch locking button on the left side of the handle. While
holding the button in release the trigger. To release the locking button,
depress the trigger and release.
Variable Speed - You can adjust the speed of the sander by turning the
thumbwheel. Thumbwheel position #1 provides the slowest operating
speed (3300RPM) and position #6 the fastest (4500 RPM). You can
change the speed while the motor is “ON” or “OFF”.
Always turn machine off and unplug when not in use.
Move machine slowly over area to be sanded, replace sandpaper as needed.
When switching from one grit to another vacuum area thoroughly to avoid
scratches from previous grit.
SANDPAPER
This machine uses 5” hook and loop sanding discs. Various grits are avail-
able from the manufacturer in 24, 36, 40, 60, 80, 100, 120, and 180 grits.
31
BLANK
