CHERUBINI METAHome, Instructions Manual

18

The Gateway turns on as soon as it is powered. If it had previously been switched off 
using the ON/OFF button on the Gateway, it is switched on by pressing and holding the 
ON/OFF button for approximately one second. The LED will illuminate with a YELLOW 
light. 

After the start-up procedure, the LED turns light GREEN, then GREEN, and after a few 
moments starts flashing GREEN every 5 seconds, indicating that the system is fully 
started up and it is possible to connect to the Gateway through the App.

Press and hold the ON/OFF button on the Gateway for approximately 4 seconds until 
the RED LED lights up.

SWITCHING ON GATEWAY

GATEWAY SHUTDOWN

Once the App has been downloaded, it is necessary to log in for the first time using 
a smartphone or tablet connected to the same LAN network to which the Gateway is 
connected. 

The default login credentials are as follows: 
User: user
Password: smarthome

At the end of the first registration, you will be asked to customise your password.  

REGISTRATION AND FIRST ACCESS TO THE GATEWAY

Fig. 1

Fig. 2

Fig. 3

Fig. 4

E

NG

L

IS

H