Chery QQ Service Manual 465 Engine Mechanical System
- 12 –
Chery Automobile Co., Ltd
while increasing the torque. circumstances:
l
Crankshaft balancer or pulley nave is broken.
l
Replace parts if necessary
l
Transmission belt of auxiliary is too tight or there are
some scratching marks on it.
l
Replace driving belt if necessary
l
Flywheel is broken.
l
Replace flywheel
l
Clearance of crankshaft main bearing is too big.
l
Replace parts if necessary.
l
Clearance of connecting rod bearing is too big.
l
Replace parts if necessary
4 Diagnosis of driving belt noise
Step
Operation
Yes
No
The following circumstances indicate that there is whispering noise:
l
There is a high pitch noise when drive belt or pulley rotate every circle.
l
It usually happens in cold and damp morning.
l
Sprinkle some water on the drive belt for confirmation, the noise should stop
immediately.
1
Check to see whether or not the belt pulley is
malposition.
Check to see if there are any belt pulleys are
malposition?
To step2
To step3
2
Fix position of the belt pulley which is
malposition once again, to see whether or not
there is still any whispering noise?
To step3 System normal
3
Check to see whether or not the bracket is bent
or broken.
Are there any bent or broken bracket?
To step4
To step5
4
Replace the bent or broken bracket
Is there any whispering noise?
To step5
System normal
5
Check to see whether or not the fastener is
loose or lost.
Is there any loose or lost fasteners?
To step6
System normal
6
Fasten any loose fasteners.
Lost fastener should be replaced immediately.
To step7
System normal
