Apron Gib –
There are 2 setcrews that tension the saddle gib. Before making adjustments to the saddle
gib, ensure that the front lock lever is loose by turning it counterclockwise.
See Figure 32.
It is important the setcrews are tightened evenly. A slight drag should be detected while turning the hand
crank at the end of the lathe.
Figure 32.
This bolt locks the apron in place.
HEAD STOCK
The
Head Stock
can be adjusted up or down to suit height requirements for different workpieces.
Figure
33
shows the locking setscrew and lifting mechanism. To adjust the height, loosen the locking setscrew
and rotate the lifting levers. When the
Head Stock
is at the desired height, lock in place with the lever.
The
Head Stock
can be rotated around the
column
allowing it to be positioned out of the way during lathe
operations.
Figure 33.
Elevating the
Head Stock.
Chester UK Model B
21