1.0 05/05/2013
4
14. Care should be taken to ensure that the workpiece shall be clamped firmly and the spindle
speed should not exceed the safe speed of the chuck.
15. As there may be contact with the human body, especially when using materials of small
diameters, under no circumstances the bar materials extending beyond the end of the spindle of
the headstock that has no special protection or corresponding support shall be used.
16. There is a marking of speed limit for the chuck and no shift of speed during running posted on
the lower right corner of the headstock, an electric warning sign posted on the electrical cabinet
and a warning sign of no touch on the workpiece (or chuck) with hand is allowed when the
workpiece is rotating posted on the protective cover of the chuck in this machine tool, so as to
remind you take care during your operation.
17. The Emergency Stop button is a red button on the control panel and, when it is presses down,
the motor will stop its rotation immediately, which shall be used in an emergency situation to
prevent the machine tool from collision.
18. Do not process toxic or flammable materials, which will emit deadly fumes. Before processing,
consult your material suppliers, so as to obtain safe materials.
19. Do not carry out be the maintenance on the machine tool when it is charged. Check the control
components and the operating elements of the machine tool regularly, so as to ensure that the
machine tool works normally. When carrying out an overhaul of the machine tool, qualified parts
& components shall be used for replacement.
20. Do not carry out any modifications or change of the equipment presumptuously, which, if
necessary, shall be treated by this company. Any personal injury or mechanical damage to the
machine tool caused by any modification or change shall not be within the scope of the
responsibility of this company.
21
．
Keep children far away from the machine tool.
2.2 Safety Warnings and Description of Notes and Markings
This manual contains safety and prevention measures to protect the users and
prevent the machine tool from being damaged, which, according to their nature of safety, is classified
into warning, notice and additional information as notes or description. Please read the warning, notice
and notes carefully before operating the machine tool.
