1.0 05/05/2013
9
as to prevent the danger of the hair from being rolled into the rotating part of the machine tool.
32
．
When carrying out other operations close to the rotating part of the machine tool,
special attention should be paid to safety.
33
．
Attention should be always paid to the operations of filing it smooth and deburring.
Special attention should be paid, when the file and the deburring tool get close to the chuck, as
the file and the deburring tool may collide with the chuck.
34
．
For the machine tool, in which the clutch is used for driving, when carrying out the
measuring work, pay attention that the clutch should be in the shutdown position.
35
．
When putting your hand on the clutch handle, attention should be paid to the rotation
and the shutdown positions of the spindle.
36
．
When measuring the workpiece clamped in the chuck, ensure that the spindle of the
machine tool should be in its shutdown position.
37
．
When using a measuring meter on the machine tool, ensure that the motor of the
machine tool should be in its shutdown position.
38
．
Before carrying out the operation of the machine tool, the operator should put on the
protective articles that meet the requirements specified in the safety standards and during the
operation of the machine tool, the protective articles are not allowed to be put off for even a
short lapse of time. The protective articles should be worn properly.
39
．
Care should be taken to the cutting chips flying out from the machine tool.
40
．
An appropriate protective plate should be selected for the operation position.
41
．
When the chuck or the workpiece is in motion, be sure not to step across or bypass the
chuck or the workpiece to carry out the adjustment. Be sure not to step across or bypass the
chuck or the workpiece to take things. While adjusting the machine tool or the workpiece, pay
attention to the position where the workpiece is placed. Be sure not to step across or bypass the
chuck or the workpiece to move the tool/lathe to another location. Be sure not to step across or
bypass the chuck or the workpiece to tighten up the parts on the lathe. Be sure not to step
across or bypass the chuck or the workpiece to remove the iron chips.
42
．
Be sure to master an appropriate method of loading and not to apply force from an
inappropriate position.
43
．
Be sure not to install a workpiece that is too big or too heavy for the machine tool.
44
．
Be sure not to install a workpiece that is too big or too heavy for the operator.
45
．
Use the necessary tools to process the workpieces.
46
．
Be sure not to use excessive force on the accessory or the joystick.
47
．
Pay attention to clamp the workpiece securely.
