1.0 05/05/2013
16
machine tool.
3.5 Dimensions and Installation Drawings
3.6 Trial Run
1
．
On the whole, it is first to prevent any
accidental switching on. Do not first connect the
power supply. Pull the high & low speed handle
behind the spindle box to the low speed position
(as indicated by the label) and rotate the chuck
with hand to verify that the position is right.
。
2
．
Ensure that the carriage has left the chuck
and is in its disengaged position, then insert the
power wires into the socket of the work
site(220V), open the red cover of the emergency
stop switch on the top of the electrical switch box, press the green button and the machine tool
power is turned on. Then turn the positive/reverse rotation switch to the positive rotation
position. Finally rotate the stepless variable speed regulation button clockwise slowly. Pay
attention that, for a new startup each time, the acceleration should not be too fast and, as the
