1.0 05/05/2013
3
2.Safety
2.1 Safe Operation Guide
This machine tool is a high speed and powerful cutting machine tool, which, if used improperly, will
lead to danger occurred.
Operators are requested to read the Safe Operation Guide described below before operating the
machine tool and care should be taken to observe and maintain the lathe in a normal use environment in
the subsequent use, so as to avoid any danger from occurring.
Important -- Only those professional persons who have been subject to the operating manual
and the machine tool safe operation training can operate the machine tool.
Be sure to read the Safe Operation Guide carefully described below before operating the
machine tool:
1. Keep the machine tool and the working area clean and orderly.
2. All the protective devices and the cover plates shall be in place and the side covers shall be
closed.
3. Do be careful not to place any objects within the machining area, as there may be collisions
occurred of them with the rotating parts or moving parts of the machine tool.
4. Do not touch or step across the moving or rotating parts of the machine tool.
5. Before starting up the machine tool, it must be known how to shutdown the machine tool.
6. Do not operate the machine under the overload.
7. In case of any unforeseen circumstances occurred, the operation of the machine tool should be
stopped immediately.
8. Before installing a chuck or other accessories on the spindle, the power of the machine tool
should be cut off, so as to prevent the spindle from rotation.
9. In the absence of checks and assertions of whether your fixtures are compatible with the
machine tool or not, your fixtures shall not be installed.
10. Check the load capacity of the centers used to find out whether they can meet the requirements.
11. When leaving the machine, be sure to switch off the power of the machine tool.
12. The maximum weight of the workpiece on the machine tool shall be 40kg.
13. The chuck shall be correctly and securely mounted on the spindle of the machine tool.
