ARION : 600 SERIES
-
Receiving and Unpacking Instructions
WARNING
Receiving and Initial Inspection:
Although we have taken our best precautions to pack your Arion rack, damage may occur from external forces during shipment of your
Arion rack, please follow these steps.
1. Inspect the package for any indentations, holes or other damage and note these issues on the shipping documents. If possible, photograph the damaged area as well.
2. After opening the crate, check the components for any signs of damage. Record any damage and report to our customer service at: commce@chevalgrp.com. Keep the original packing materials
in case the shipping company needs to see.
3. All damages must be reported to Cheval within three (3) days after delivery. Claims made after 3 days will not be under Cheval's responsibility.
MOVING THE CARTON
HEAVY LOAD HAZARD:
This carton is not intended to be lifted or moved by hand. Failure to follow these instructions can result in injury. The recommended equipment for moving the
carton are pallet jack or forklift.
1. Move the carton to a solid, level area clear of obstructions.
2. Carefully cut the wrapping straps securing the carton.
3. Remove the top cover and take out the assembly guide for further instructions.
UNPACKING AND STAGING THE COMPONENTS FOR ASSEMBLY:
The Arion Enclosure has been packed to protect the components from damage during shipping.
For the best assembly experience, please follow these steps.
1. Prepare your work area. The area needed is approximately 8’ x 8’. The surface must be clean, flat and either carpeted or use a drop cloth to prevent scratching the components.
2. Remove the components and check all are complete by referring to the “parts check list”. Arrange the components according the assembly sequence, Step1, Step2 and etc.
You may find it easier to assemble steps 1-4 on a table or raised surface.
3. After step 4, stand the rack up on the floor and continue the assembly.
1030 mm.
2075 mm.
395 mm.
Thank you for purchasing our Arion 19" enclosure.
We hope you find the product experience completely to your satisfaction and appreciate any feedback you may have.
