manualshive.com logo in svg

Chevrolet 6500XD 2022, Owner'S Manual

The Chevrolet 6500XD 2022 is a robust and reliable truck designed to tackle any heavy-duty task. Ensure optimal performance and maintenance with the comprehensive Owner's Manual. Access this essential manual for free download at 88.208.23.73:8080, providing you with all the necessary information to maximize your truck's capabilities.

Share
Download
background image

Chevrolet Low Cab Forward 6.7L Diesel Engine 6500XD (GMNA-Localizing-

U.S.-15749874) - 2022 - CRC - 12/1/21

306

Index

Dome Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Door

Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Drive Belt Routing, Engine . . . . . . . . . . . . . . . 296
Driver Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Driver Information Center (DIC) . . . . . . . . . . . 58
Driving

Better Fuel Economy . . . . . . . . . . . . . . . . . . . 108
Emergencies . . . . . . . . . . . . . . . . . . . . . . . 121, 129
Hill and Mountain Roads . . . . . . . . . . . . . . . 117
If the Vehicle is Stuck . . . . . . . . . . . . . . . . . 120
Wet Roads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Winter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

E

Electrical Equipment, Add-On . . . . . . . . . . . . .185
Electrical System

Overload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

Emergencies . . . . . . . . . . . . . . . . . . . . . . . . . 121, 129
Engine

Air Cleaner/Filter . . . . . . . . . . . . . . . . . . . . . . 200
Alarm and Automatic Shutdown . . . . . . . 136
Check Light (Malfunction Indicator) . . . . . . 51
Checks Before Operating . . . . . . . . . . . . . . . . 137
Compartment Overview . . . . . . . . . . . . . . . . 195
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Coolant Temperature Gauge . . . . . . . . . . . . 49

Engine (cont'd)

Drive Belt Routing . . . . . . . . . . . . . . . . . . . . . 296
Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
High Idle System . . . . . . . . . . . . . . . . . . . . . . 136
Oil Pressure Light . . . . . . . . . . . . . . . . . . . . . . . 56
Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Running While Parked . . . . . . . . . . . . . . . . . 144
Shutdown Warning Light . . . . . . . . . . . . . . . 57

Engines

Diesel Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Exhaust Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Exhaust Brake Light . . . . . . . . . . . . . . . . . . . . . . . .53
Exhaust Fluid

Diesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Extender, Seat Belt . . . . . . . . . . . . . . . . . . . . . . . 30
Exterior Lamp Controls . . . . . . . . . . . . . . . . . . . . 67

F

Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

Filter,

Engine Air Cleaner . . . . . . . . . . . . . . . . . . . . . 200

Fixed Mast Antenna . . . . . . . . . . . . . . . . . . . . . . .75
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Flashers, Hazard Warning . . . . . . . . . . . . . . . . . 68
Flat Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245

Fluid

Automatic Transmission . . . . . . . . . . . . . . . 200
Power Steering . . . . . . . . . . . . . . . . . . . . . . . . 207
Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Frequency Statement

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

Front Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Front Seat Position Seats

Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Fuel

Biodiesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Cold Weather Operation . . . . . . . . . . . . . . . 180
Diesel Engines . . . . . . . . . . . . . . . . . . . . . . . . . 180
Economy, Driving for Better . . . . . . . . . . . 108
Filling the Tank . . . . . . . . . . . . . . . . . . . . . . . . 184
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Running out of Fuel . . . . . . . . . . . . . . . . . . . 183
Water in Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

Fuel for Diesel Engines . . . . . . . . . . . . . . . . . . . 180

G

Gauges

Brake Air Pressure . . . . . . . . . . . . . . . . . . . . . . 50
Diesel Exhaust Fluid (DEF) . . . . . . . . . . . . . . 50
Engine Coolant Temperature . . . . . . . . . . . . 49
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Summary of Contents for 6500XD 2022

























































































































































































































































































































Reviews:

No comments

Related manuals for 6500XD 2022

Strend Pro DB2000 Instruction Manual preview
DB2000
Brand: Strend Pro Pages: 14
FDA Cleared DW-11A User Manual preview
DW-11A
Brand: FDA Cleared Pages: 22
Galbreath Hoist Series Operation And Maintenance preview
Hoist Series
Brand: Galbreath Pages: 26

Brands by name

Popular brands

Load more brands