Chevrolet Low Cab Forward 6.0L Gasoline Engine 3500/4500 Series (GMNA-
Localizing-U.S.-12533400) - 2019 - CRC - 11/19/18
118
Infotainment System
Entering Tone Numbers
You can transmit tone numbers
during a call.
1. Press FUNC during a call.
2. Turn MODE/
O
/ENTER to
select the tone number. You
can enter phone numbers by
one digit at a time.
Numeric character (0-9) and
symbols (*, #, +) are available.
You can use the symbols (+)
only for the first digit.
3. Press
y
. The selected tone
numbers are transmitted. You
will move on to the next step
and select the tone numbers
again if necessary.
Talking During Call Waiting
When the display window indicates
the phone call in progress, the Call
Waiting feature enables you to
receive and answer a second phone
call while placing the first call
on hold.
Press Off Hook when the ring tone
starts during a call.
.
While placing the phone call in
progress on hold, you will be
connected to the second caller.
.
Press On Hook when you wish
to turn off the Call Waiting
feature.
.
When the Call Waiting feature is
turned off, you will be connected
to the first caller on hold.
.
Pressing the Off Hook again
enables you to switch between
callers on Call Waiting.
This function is available only when
your phone is compatible with the
Call Waiting feature.
Displaying the Registered Mobile
Phone
1. Press FUNC.
2. Turn MODE/
O
/ENTER to
select BLUETOOTH, and then
press ENTER.
3. Turn MODE/
O
/ENTER to
select LIST PHONE, and then
press ENTER.
4. Turn MODE/
O
/ENTER to
select mobile phone name, and
then press ENTER.
5. Turn MODE/
O
/ENTER to
select the display item of your
choice, and then press
ENTER.
SELECT: Connect the
registered mobile phone.
SEARCHING is displayed.
DISCONNECT: Disconnect the
registered mobile phone. When
DISCONNECT? is displayed,
press ENTER.
DELETE: Delete the registered
mobile phone. When DELETE?
is displayed, press ENTER.
Adjusting the Handsfree Volume
1. Press FUNC.
2. Turn MODE/
O
/ENTER to
select BLUETOOTH, and then
press ENTER.
3. Turn MODE/
O
/ENTER to
select HF SOUND, and then
press ENTER.
