-3-
CHANNEL scanning
For an interference- free operation, a cleaner channel might be necessary if the current one
receives too much interference. Before scanning, the transmitter must be switched off.
1.
Press and release
SET
button until the
AUTO SCAN page appears.
2.
Press ▲(
UP)
or ▼(
DOWN)
button to find and
locate a clear, interference- free channel.
►
►
3.
After a channel is chosen, wait 5 seconds to store the setting.
Adjusting VOLUME level
1.
The setting can be made right on the
homepage.
2.
Press
▲(
UP)
or ▼(
DOWN)
button to choose
a new level.
►
3.
After the setting is made, wait 5 seconds to store the setting.
Adjusting SQUELCH level
When interference is encountered try reducing the sensitivity of the receiver, thus less
susceptible to interference.
1.
Press and release
SET
button until the
SQUELCH SETUP page appears.
2.
Then press ▲(
UP)
or ▼(
DOWN)
button to
choose a new level between 1 and 10.
►
►
3.
After a level is chosen, wait 5 seconds to store the setting.
Since increasing the squelch level will also reduce the reception distance, it
’s recommended to
choose the lowest level that can eliminate the interference.
If this still does not solve the problem it means this frequency is not suitable. Adjust the squelch
back to its preset level and use the scan function to locate a clear, interference-free channel.
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
