-2-
Channel synchronizing of the receiver and transmitter
Align infrared areas of the receiver and transmitter within 30cm.
A. Changing
the receiver’s channel
B. Changing
the transmitter’s channel
1.
Press the synchronizing button of the
transmitter.
1.
Press the synchronizing button of the receiver
and the receiver will transmit the frequency to
the transmitter and synchronize the channels.
▼
▼
2.
The transmitter's LED will grow to denote
transmitting the frequency to the receiver
and synchronizing the channels.
2.
The transmitter's LED will grow to denote its
channel synchronized by the receiver.
If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each
other, devices are within 30cm of each other, and try again.
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
< 30cm
