-3-
Channel setting
1.
Use
MENU
button
⑥
to go to the
CHANNEL
|
FREQUENCY page.
2.
Press and hold the
SET
button
⑦
for 3
seconds, then the upper-right channel
number will flash to allow changes to be
made.
►
►
3.
Press
SET
/
MENU
buttons to change the
channel number. The corresponding
frequency will change accordingly.
4.
3 seconds after selecting a channel, it will be
automatically saved.
►
Battery type setting
1.
Use
MENU
button
⑥
to go to the BATTERY
TYPE page.
2.
Press and hold the
SET
button
⑦
for 3
seconds, then the cursor
will flash to
allow changes to be made.
►
►
3.
Press
SET
button to select either NiMH
(rechargeable battery) or AKLN (alkaline
battery).
4.
3 seconds after selecting a battery type, it will
be automatically saved.
►
Important
: NiMH battery must be selected when rechargeable battery is being used. Never
select AKLN (alkaline) when transmitter is intended for charging as alkaline battery isn’t
rechargeable. Wrong battery selection will result in battery sensing electronics to display wrong
and misleading status information.
C H : 0 0 1
650.000M
C H : 0 0 1
650.000M
C H : 0 1 0
652.250M
C H : 0 1 0
A K L N
N I M H
A K L N
N I M H
A K L N
N I M H
A K L N
N I M H