10
Instructions
Operating active audio link
STAGE PRO
could be operated as the MASTER unit in an audio link (wired) configuration. The
Master is capable of daisy chain manner wire connecting of up to about 20 active speakers
(Stage Slave).
1
Connect the
ACTIVE OUT
of the Master to the
ACTIVE IN
of the 1st
STAGE SLAVE
.
The
SLAVE
’s output jack should be connected to the
ACTIVE IN
of the 2nd
STAGE
SLAVE
and so forth.
2
Turn on master POWER of EACH
STAGE SLAVE
and then adjust master volume
control to a desired level.
3
Bass/Middle/Treble tone levels can be adjusted by individual controls.
TONE control