SKU 38648
For technical questions, please call 1-800-444-3353.
Page 11
cleaning, inspection,
and maintenance
caution:
Always disconnect the Biscuit
Joiner from its electrical power supply
source before performing any clean-
ing, inspection, or maintenance.
Do not introduce water into the elec-
1.
tric motor through the motor vents.
Do not use solvents to wipe off the
2.
Biscuit Joiner, as damage may result.
With a brush or soft cloth, remove all
3.
the sawdust from the Biscuit Joiner.
If necessary, wipe with a damp cloth.
4.
You may use a mild detergent.
Once clean, lubricate all moving parts
5.
with a light oil.
When storing, keep the Biscuit Joiner
6.
in a box, or cover with a cloth cover.
Before each use, inspect the general
7.
condition of the Biscuit Joiner. In-
spect switch, power plug and cord as-
sembly, and extension cord (if used)
for damage. Check for loose screws,
misalignment, binding of moving
parts, improper mounting, broken
parts, loose or damage Cutting Blade
and any other condition that may af-
fect its safe operation. If abnormal
noise or vibration occurs, turn off the
Biscuit Joiner immediately and have
the problem corrected before further
use.
do not use damaged equipment.
Included in the Biscuit Joiner kit are
8.
two additional Motor Carbon Brushes
(23). In the event the old Carbon
Brushes need replacing, it is recom-
mended that
only
a qualified techni
-
cian perform this service.
please read tHe FolloWing
careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEI-
THER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE
IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBU-
TOR EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UN-
DERTAKEN BY CERTIFIED AND LICENSED TECH-
NICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT
OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
