SKU 38648
For technical questions, please call 1-800-444-3353.
Page 2
speciFications
Motor Speed
10,000 RPM (No Load)
Power Rating
120 V~ / 60 Hz / 6 A
Blade
4” Diameter
Spindle
Bearing Mounted
Fence Adjustment
Max. Depth: 1-1/8”
Max. Angle: 45°
Preset Depth Stops
0, 10, 20
Power Cord
18 AWG, 3-Prong Plug
saVe tHis manual
You will need the manual for the safe-
ty warnings and precautions, assembly
instructions, operating and maintenance
procedures, parts list and diagram. Keep
your invoice with this manual. Write the
invoice number on the inside of the front
cover. Keep the manual and invoice in a
safe and dry place for future reference.
general saFetY
Warnings and
precautions
Keep WorK area clean and
1.
drY.
Cluttered, damp or wet work
areas invite injuries.
Keep cHildren aWaY From
2.
WorK area.
Do not allow children
to handle this product.
store idle eQuipment.
3.
When
not in use, tools and equipment
should be stored in a dry location to
inhibit rust. Always lock up tools and
equipment and keep out of reach of
children.
do not use tHis product iF
4.
under tHe inFluence oF al-
coHol or drugs.
Read warning
labels on prescriptions to determine if
your judgment or reflexes are im
-
paired while taking drugs. If there is
any doubt, do not attempt to use this
product.
use eYe, Hearing, and
5.
BreatHing protection.
Wear
ANSI-approved safety impact eye
glasses, ANSI approved hearing
protection, and dust mask or respira-
tor when using this product. ANSI-
approved safety impact eye glasses,
hearing protection, and dust masks
and respirators are available from
Harbor Freight Tools.
dress saFelY.
6.
Non-skid footwear
or safety shoes should be used when
working with this product. Do not
wear loose clothing or jewelry as they
can become caught in moving parts.
Wear a protective hair covering to
prevent long hair from becoming
caught in moving parts. If wearing
a long-sleeve shirt, roll sleeves up
above elbows.
industrial applications must
7.
FolloW osHa reQuirements.
do not oVerreacH.
8.
Keep prop-
er footing and balance at all times to
prevent tripping, falling, back injury,
etcetera.
staY alert.
9.
Watch what you are
doing at all times. Use common
sense. Do not use this product when
you are tired or distracted from the
job at hand.
cHecK For damaged parts.
10.
Before using this product, carefully
check that it will operate properly and
perform its intended function. Check
for damaged parts and any other
conditions that may affect the opera-
tion of this product. Replace or repair
damaged or worn parts immediately.
