background image

Page 7

SKU 41213

For technical questions, please call 1-800-444-3353.

When using the polisher, maintain a firm grip on the tool with both hands to resist 

starting torque.

Use clamps (not included) or other practical ways to secure and support 

the workpiece to a stable platform.

  Holding the work by hand or against your 

body is unstable and may lead to loss of control.

this product is not a toy.  Keep it out of reach of children.
People with pacemakers should consult their physician(s) before use.  

Electromagnetic fields in close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.

  In addition, people with pace-

makers should: 

• Avoid operating alone. 

• Do not use with power switch locked on. 

• Properly maintain and inspect to avoid electrical shock.

some dust created by power sanding, sawing, grinding, drilling, and other 

construction activities, contains chemicals known [to the state of califor-

nia] to cause cancer, birth defects or other reproductive harm.

  Some ex-

amples of these chemicals are: 

• Lead from lead-based paints 

• Crystalline silica from bricks and cement or other masonry products 

• Arsenic and chromium from chemically treated lumber 

Your risk from these exposures varies, depending on how often you do this type 

of work.  To reduce your exposure to these chemicals: work in a well ventilated 

area, and work with approved safety equipment, such as those dust masks that 

are specially designed to filter out microscopic particles.  (California Health & 

Safety Code § 2249., 

et seq.

)

the warnings, precautions, and instructions discussed in this instruction 

manual cannot cover all possible conditions and situations that may occur

.  

It must be understood by the operator that common sense and caution are fac-

tors which cannot be built into this product, but must be supplied by the operator.

saVE thEsE instrUctions.

1.

17.

1.
19.

20.

21.

Summary of Contents for 41213




















Reviews: